|
|
Technische Daten
- Subscriber Modul |
Multiplexers
Multiplexor is a device that combines several signals for transmission over a single medium. A demultiplexor completes the process by separating multiplexed signals from a transmission line. Frequently a multiplexor and demultiplexor are combined into a single device capable of processing both outgoing and incoming signals. Axxcelera. |
T1/E1 Multiplexer is a modular gateway that works with Canopy Backhaul
Modules to enable one T1/E1 circuit to be extended over Ethernet networks.
The Canopy T1/E1 Multiplexer is available in two power configurations:
* an external 3.3-v DC power source from a 120/240-v
AC adapter (supplied by Canopy)
The T1/E1 Multiplexer converts the data stream from T1/E1 ports into Ethernet packets that are then transported over the Canopy BH link. This device can be used to extend T1/E1 services. You can configure the Canopy T1/E1 Multiplexer to operate as either a T1 or an E1 device. The cost of leased lines is a substantial recurring expense for service providers and enterprise customers alike. The economic benefit of replacing leased lines with a Canopy T1/E1 Multiplexer translates into cost savings for the enterprise and a business opportunity for the service provider. The ease and speed of deploying the wireless T1/E1 solution across the Canopy family of backhaul solutions is a significant advantage over the time it takes to order and provision wired T1/E1 services. Overview * The Canopy T1/E1 Multiplexer is designed to replace
leased lines in a broad array of applications which include:
By slashing the cost of monthly leased lines, enterprise owners can realize a full return on their investment within months, while also gaining access to data connectivity. Metropolitan corporate PBX networks dependent on costly T1/E1 leased lines to connect within a campus or with suburban/rural locations, can now reap huge savings by establishing a wireless voice and data connection. In addition, service providers can open new markets to increase revenue by offering wireless T1/E1 replacement services along with LAN data to remote areas. Features: * Highly scalable multi-port design upgrades one-port
at a time up to a total of 4 T1's or E1's
Benefits: The economic benefits of deploying a Canopy T1/E1 solution include the following: * Operational savings by replacing existing T1 or
E1 leased lines with a wireless link
|
Motorola Canopy Antenna reflector kit is used for extension of operating
range.
Specifications: Electrical Frequency Range
Reflector can be used with Motorola Canopy at 2.4 GHz and 5 GHz Reflector Gain
*
18dB @ 5.7GHz
SM with Reflector Gain
*
6dBi @ 5.7GHz
Beamwidth at -3dB Azimuth
*
12 degrees @ 2.4 GHz
Elevation
*
15 degrees @ 2.4 GHz
Mechanical Reflector Height
Reflector Width
Weight
Mounting adjustment range
Environmental Wind loading parameters Projected Area
2.5 sq.ft. Side Thrust
*
67.2 lb @80Mph
NOTES: U Bolts 5/16 and V-Brackets not included with 27RD or 27RD-50 products and must be purchased separately. |
2.4 GHz - Komponenten ohne Netzteil |
|||
Artikelnummer | Bezeichnung | Preis excl MwSt. | |
WADX4010A | Richtfunk/Backhaul, 2.4 GHz , 10 Mbps | EUR 985,50 | |
WADX4011A | BILD | Richtfunk/Backhaul, 2.4 GHz , 10 Mbps , mit Reflektor | EUR 1.120,50 |
WADX4012A | Richtfunk/Backhaul, 2.4 GHz , 20 Mbps | EUR 1.435,50 | |
WADX4013A | BILD | Richtfunk/Backhaul, 2.4 GHz , 10 Mbps , mit Reflektor | EUR 1.615,50 |
5.4 GHz - Komponenten ohne Netzteil |
|||
Artikelnummer | Bezeichnung | Preis excl MwSt. | |
WADH4019A | Richtfunk/Backhaul, 5.4 GHz , 10 Mbps | EUR 985,50 | |
WADH4020A | BILD | Richtfunk/Backhaul, 5.4 GHz , 10 Mbps , mit Reflektor | EUR 1.120,50 |
WADH4021A | Richtfunk/Backhaul, 5.4 GHz , 20 Mbps | EUR 1.435,50 | |
WADH4022A | BILD | Richtfunk/Backhaul, 5.4 GHz , 20 Mbps , mit Reflektor | EUR 1.615,50 |
|
|
|
|
WADH4029A | Richtfunk/Backhaul, 5.4 GHz , 10 Mbps | EUR 2.956,50 | |
WADH4031A | BILD | Richtfunk/Backhaul, 5.4 GHz , 10 Mbps , mit Reflektor | EUR 3.361,50 |
WADH4030A | BILD | Richtfunk/Backhaul, 5.4 GHz , 20 Mbps , mit Reflektor | EUR 4.846,50 |
|
|||
Artikelnummer | Bezeichnung | Preis excl MwSt. | |
RDN9723A | Universales Netzteil, ACPS220, für SM und AP | EUR 13,50 | |
RDN9724BT | Cluster Management Modul (CMM) | EUR 1.975,50 | |
RDN4370A | Cluster Management Modul Micro, (CMM Micro) | EUR 1.255,-- | |
RDH4208A | BILD | Ethernet Blitzschutzmodul 300SS, klick für Anleitung | EUR 36,-- |
RDN9720A | BILD | Reflektor 27RD | EUR 135,-- |
RDN9721A | BILD | Befestigungsmaterial, SMMB1, Universal Mounting Bracket, klick für Anleitung | EUR 22,50 |
RLN5688A | Befestigungsbolzen (U-Bolt) | EUR 27,-- | |
WAVN4074A | BAM Authentification Server, Software (CD), klick für Anleitung | EUR 900,-- | |
WAVN4075A | BAM Software Lizenz, klick für Anleitung | EUR 90,-- | |
PMLN4662A | BILD | 2er-Pack T1/E1 Multiplexer (1 port), klick für Anleitung | EUR 2.520,-- |
RRDN4966A | BILD | 2er-Pack T1/E1 Multiplexer (4 port), klick für Anleitung | EUR 3.600,-- |
WADN4257A | T1/E1 Upgrade Key 1/port per unit
Highly scalable multi-port design upgrades one-port at a time up to a total of 4 T1's or E1's |
EUR 315,-- | |
RK1000TE | T1/E1 Multiplexer Rack Mount-Kit | EUR 99,-- |
Stand : November 2005 |
|
|
|